How to Install Gyprock Ceiling with Professionals?
When you're remodelling a room that covers both the walls and ceilings, it's generally a good idea to tackle the ceiling first. Doing so can help avoid any possible harm to the wall fixtures during the ceiling project. For a detailed guide on how to Gyprock ceiling installation in Perth smoothly, please follow the steps outlined below. Apply Adhesive Start by spreading walnut-sized amounts of Gyprock Stud Adhesive on each joist. Begin about 200mm away from the edge of the board you're working on and spread it every 200–230mm, leaving a 200mm gap on each side of the middle of the adhesive-free area. Fixing the End of Sheets Don't use adhesive on the joists where the sheets end. These spots should be held down with just nails or screws. Putting Up the Sheets Lay the sheets at right angles to the joists. Secure them with nails or screws about 10–16mm from the edge of the sheet in the cutout area. Make sure the fastener is just below the surface without damaging the